Sim Card Reader Mac App

• Sim Card Reader Mac Apps
• Sim Card Reader Mac App Windows 10
• Sim Card Reader For Mac
• Sim Card Reader For Macbook Pro

NOTE:

Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites

Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the built in smart card ability (very bottom of macuninstall link above)

You can use an SDXC card in Windows 7, Windows 8, and Windows 10 with these Mac computers: MacBook Pro (Early 2011 and later) MacBook Pro models from 2016 and later don't have a built-in SD card slot. You can use a USB-C card reader, or a combination of a USB-C to USB Adapter and a USB card reader. MacBook Air (Mid 2011 and later).

1. With this tool, you will no longer need obsolete and unreliable Faraday bags. You can clone original SIM card of the phone being investigated even without knowing the PIN or create new SIM cards with any ICCID or just format your SIM card to renew for the next use. You are also able to connect multiple SIM card readers at the same time.
2. Yes, you can read the information on your SIM card. There are USB SIM card readers and software available for purchase – the Dekart SIM Card reader is one example. Once you have purchased a SIM card reader, simply place your SIM card inside, and insert the reader into a spare USB drive on your computer.
3. SIM Card Reader is an app capable of recovering text messages using your computer that you have deleted from your from mobile phone. Just like with information stored on your hard drive or flash drives, when you delete a message from your phone, it isn't permanently deleted from the memory, but rather the information is overwritten without.
4. On the SIM Card screen, you can look at the SIM card details like the carrier and IMEI number. You also view present and past SIM card locations on an interactive map. You can potentially track your target or a lost device this way. Additionally, you have the option to sign up for a SIM Card Alert. When the old SIM Card is replaced by a new one.

If you purchased your Mac with OS Catalina (10.15.x) already installed, you can skip the uninstall part above and follow the instructions below.

6 'high level' steps needed, follow down the page to make this a painless systematic process

Step 1: Is your CAC reader Mac friendly?

Visit the USB Readers page to verify the CAC reader you have is Mac friendly.

Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.

'Some, not all' CAC readers may need to have a driver installed to make it work.

NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).

Information about these specific readers are in Step 2

Step 2: Can your Mac 'see' the reader?

Plug the CAC reader into an open USB port before proceeding, give it a few moments to install

Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'

Step 2b: Click 'System Report...' (button)

Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.

Step 2c1: Verify firmware version on your SCR-331, SCR-3310 v.20, GSR-202, 202V, 203, or SCR-3500a reader. If you have a reader other than these 6, Proceed directly to step 3

Step 2c1a-SCR-331 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCRx31 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.25, you need to update your firmware to 5.25. If you are already at 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1b-SCR-3310 v2.0 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCR3310 v2.0 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 6.02, it will not read the 'G+D FIPS 201 SCE 7.0' CAC on a Mac. I contacted HID (the company that makes these readers) on 14 DEC 2020 to find a way to update the firmware to 6.02. If you are already at version 6.02, your reader should work fine on your Mac and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1c-SCR-3500A reader

If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open

Step 3: Verify which version of MacOS you have?

(You need to know this information for step 6)

Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'

Step 3b: Look below Mac OS X for: Example: Version 10.X.X, or 11.X

Step 4: Figure out which CAC (ID Card) you have

(You need to know this information for step 6)

Look at the top back of your ID card for these card types. If you have any version other than the six shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.

Find out how to flip card over video

Step 5: Install the DoD certificates (for Safari and Chrome Users)

Go to Keychain Access

Click: Go (top of screen), Utilities, double click Keychain Access.app

(You can also type: keychain access using Spotlight (this is my preferred method))

Select login (under Keychains),and All Items (under Category).

Download the 5 files via links below (you may need to <ctrl> click, select Download Linked File As... on each link) Save to your downloads folder

Please know... IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.

https://militarycac.com/maccerts/AllCerts.p7b,

https://militarycac.com/maccerts/RootCert2.cer,

https://militarycac.com/maccerts/RootCert3.cer,

https://militarycac.com/maccerts/RootCert4.cer, and

Double click each of the files to install certificates into the login section of keychain

Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:

DOD EMAIL CA-33 through DOD EMAIL CA-34,

DOD EMAIL CA-39 through DOD EMAIL CA-44,

DOD EMAIL CA-49 through DOD EMAIL CA-52,

DOD EMAIL CA-59,

DOD ID CA-33 through DOD ID CA-34,

DOD ID CA-39 through DOD ID CA-44,

DOD ID CA-49 through DOD ID CA-52,

DOD ID CA-59

DOD ID SW CA-35 through DOD ID SW CA-38,

DOD ID SW CA-45 through DOD ID SW CA-48,

DoD Root CA 2 through DoD Root CA 5,

DOD SW CA-53 through DOD SW CA-58, and

DOD SW CA-60 through DOD SW CA-61

NOTE: If you are missing any of the above certificates, you have 2 choices,

1. Delete all of them, and re-run the 5 files above, or

2. Download the allcerts.zip file and install each of the certificates you are missing individually.

Errors:

Error 100001 Solution

Error 100013 Solution

You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates

You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates

Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.

You may be prompted to enter computer password when you close the window

Once you select Always Trust, your icon will have a light blue circle with a white + on it.

The 'bad certs' that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.

The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x

If you have tried accessing CAC enabled sites prior to following these instructions, please go through this page before proceeding

Clearing the keychain (opens a new page)

Please come back to this page to continue installation instructions.

Step 5a: DoD certificate installation instructions for Firefox users

NOTE: Firefox will not work on Catalina (10.15.x), or last 4 versions of Mac OS if using the native Apple smartcard ability

Download AllCerts.zip, [remember where you save it].

double click the allcerts.zip file (it'll automatically extract into a new folder)

Option 1 to install the certificates (semi automated):

From inside the AllCerts extracted folder, select all of the certificates

<control> click (or Right click) the selected certificates, select Open With, Other...

In the Enable (selection box), change to All Applications

Select Firefox, then Open

You will see several dozen browser tabs open up, let it open as many as it wants..

You will eventually start seeing either of the 2 messages shown next

If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

or

'Alert This certificate is already installed as a certificate authority.' Click OK

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Option 2 to install the certificates (very tedious manual):

Click Firefox (word) (upper left of your screen)

Preferences

Advanced (tab on left side of screen)

Certificates (tab)

View Certificates (button)

Authorities (tab)

Import (button)

Browse to the DoD certificates (AllCerts) extracted folder you downloaded and extracted above.

Note: You have to do this step for every single certificate

Note2: If the certificate is already in Firefox, a window will pop up stating: 'Alert This certificate is already installed as a certificate authority (CA).' Click OK

Note3: If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Step 6: Decide which CAC enabler you can / want to use

Only for Mac El Capitan (10.11.x or older)

After installing the CAC enabler, restart the computer and go to a CAC enabled website

NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x) or Catalina (10.15.x) computers no longer need a CAC Enabler.

Try to access the CAC enabled site you need to access now

Mac support provided by: Michael Danberry

What is SD?

SD describes devices that conform to SD standards for non-volatile memory cards. See the SD Association website for details.

Are there size limitations for the cards that can be inserted into the SD slot?

Yes. The SD card specification for a memory card is 32mm by 24mm by 2.1mm. You can also use thinner cards, such as MultiMediaCards (MMC). Avoid using cards that have a thickness greater than 2.1mm, as they might damage the SD card slot if you try to insert them.

Which SD card formats work in the SD card slot?

Cards that conform to the SD 1.x, 2.x, and 3.x standards should work. The SD card slot can use:

• Standard SD, 4MB to 2GB
• SDHC (Secure Digital High Capacity), 4GB to 32GB
• SDXC, 4GB to 2TB
• MMC (MultiMediaCards)
• UHS‑II, up to 2TB (iMac Pro only)

You can use a passive adapter like the one shown here to make MiniSD, MicroSD, and higher density formats like MiniSDHC and MicroSDHC conform to the width and thickness specifications listed above:

How fast can my Mac read or write to an SD card in the SD card slot?

Mac notebooks use the USB bus to communicate with the SD card slot. They have a maximum speed of up to 480Mbit/s. Mac desktops use the PCIe bus to communicate with the SD card slot. Desktops can transfer data at a faster rate.

Check the packaging that came with your SD media to determine the maximum transfer rate that your specific card uses.

To determine the maximum transfer speed of your Mac, you can use System Information. Choose Apple () menu > About This Mac and then click System Report.

If you use a Mac notebook:

1. Select Hardware, then select USB.
2. Select Internal Memory Card Reader and look for the Speed entry.

If you use a Mac desktop computer:

1. Select Hardware, then select Card Reader.
2. Look for the Link Speed entry. Computers that use the PCIe bus express their speed as GT/s.

Does the SD slot work with cards that exceed 32GB?

Yes. However, most media manufacturers preformat the media using common block-and-cluster sizes that don’t approach the theoretical limits of a given file system.

Most SD cards use the FAT32 file format, and preformatted FAT32 SD media is commonly available up to a capacity of 32GB. Media that exceeds 32GB usually uses the exFAT file system, while some smaller capacity cards use the FAT16 file format. Preformatted FAT16 media is generally available up to a capacity of 2GB.

If you use OS X Snow Leopard 10.6.5 or later, you can find out which file system you’re using:

1. Insert the media into the SD card slot.
2. Choose Apple menu > About This Mac.
3. Click System Report.
4. In the Hardware section, click Card Reader, and find the File System field.

Will the SD card slot work with SD cards that use the exFAT file system?

Yes. Any Mac that has an SD card slot and is running OS X 10.6.5 or later can use the exFAT file system.

exFAT is also supported in Boot Camp with Windows 7, 8.1, or 10 on any Mac made in 2011 or later with an SD card slot.

How do I insert media into the SD card slot?

When you insert the card, make sure that the metal contacts face down and point toward the computer. Don’t force media into the SD card slot, as this might cause damage.

How does my Mac use the media inserted into the SD card slot?

Your computer recognizes a card inserted into the SD card slot as a USB storage device. You can mount, read from, and write to the SD card just like you can with any other USB storage device.

Sim Card Reader Mac Apps

I put the card in the slot, but it didn’t mount. What should I do?

Sim Card Reader Mac App Windows 10

Remove the card and insert it again. Sometimes the SD card won’t mount properly if you put it into the slot too slowly.

When I try to write content to the card, I get a 'cannot be modified' message. How can I fix this?

You see this message when you try to edit data on an SD card that’s locked. You need to use the lock slider to unlock the card before you can edit the data.

To eject the card, drag the icon that represents the card to the Trash. After the icon disappears from the desktop, you can remove the card from the computer. Adjust the lock slider tab to unlock the card, then reinsert the card into the slot. See the manufacturer’s instructions for the location of the slider tab.

Can I use Disk Utility to reformat an SD card?

You can use Disk Utility to partition and format an SD device as FAT32 (using the MS-DOS FAT setting) or Mac OS Extended. The Mac OS Extended format can be used only on Macintosh systems. Non-Apple systems won’t recognize cards formatted to Mac OS Extended.

You might have to format a card that’s larger than 32GB with exFAT if you want to use it with a digital camera, GPS, or another device. When in doubt, format the card in the device that you intend to use it with.

Can I install macOS on an SD storage device and use it as a startup volume?

Use Disk Utility to change the default partition table to GUID. Then format the card to use the Mac OS Extended file format.

How do I remove a card from the SD card slot?

Before you remove the card, allow any data transfer to SD media to complete. To eject the card, drag the icon that represents the card to the Trash. After the icon disappears from your desktop, you can remove the card from the slot.

Don't remove a card while your Mac is sleeping, as this could lead to data loss. Always wake your computer and eject the SD card before removing it from your Mac.

Can I use Secure Digital Input Output (SDIO) cards?

Can I use macOS to see the specifications for the interface hardware and media inserted in the SD card slot?

You can get information about the interface hardware and the media that you inserted in the slot from the System Information:

1. Choose Apple menu > About This Mac.
2. Click System Report.
3. In the Hardware section of System Information, select USB.
4. In the list of USB devices, select Internal Memory Card Reader to access information about the interface hardware and the media inserted into the SD card slot.

Can I use the SD card slot while running Windows using Boot Camp?

The SD card slot works with Boot Camp in all supported versions of Windows. You’ll need to download and install the Windows Support Software to use the SD card slot with Windows.

Sim Card Reader For Mac

Learn more about using Windows on a Mac.

Can I use an SDXC card on my Mac with Windows?

You can use an SDXC card in Windows 7, Windows 8, and Windows 10 with these Mac computers:

• MacBook Pro (Early 2011 and later)
  MacBook Pro models from 2016 and later don't have a built-in SD card slot. You can use a USB-C card reader, or a combination of a USB-C to USB Adapter and a USB card reader.
  
• MacBook Air (Mid 2011 and later)
• Mac mini (Mid 2011 and later)
  Mac mini (Mid 2010) doesn't support SDXC cards.
• iMac (Mid 2011 and later)
  iMac (Mid 2010) doesn't support SDXC cards.

Can I use an SD, SDHC, or SDXC card to install Windows on my Mac?

Sim Card Reader For Macbook Pro

No. You can’t use SD, SDHC, or SDXC cards with Boot Camp to install Windows software on Mac computers.